HOW TO DO IT
How its all Done
Wiring together 2 x Tenshodo motor bogies to be fitted to a single EFE car
For best results, & to ensure maximum, simultaneous traction, wire the two motors fitted into your centre car together.
Connect the motors together electrically using a pair of single wires soldered to each of the top motor terminals per the image attached Thanks to John Polley of Metromodels
TENSHODO TO DCC
WIRE YOUR TENSHODO TO DCC
The Tenshodo SPUD motor bogie has a pick-up strip on each side with a section that disappears inside. with it dismantled, it is clear that these extra pieces are the contacts to the motor connections.using a slitting disc,it is a simple matter to remove these extra pieces, Now, when the SPUD is reassembled the decoder connections go as follows The Decoder black and red wires are soldered to the pick-up strip one each side The decoder orange and grey wires are soldered to those two small brass tabs they are the motor connections
HOW TO CREATE A EFFECTIVE FLASH EFFECT
If you are thinking of having some flash just like the real thing read this Thanks to John Polley of Metromdels
Please note on some sites when making it larger it does not work OK just e-mail me and i will e-mail it back to you or right click on picture drag to your main screen then click on it it then should come up bigger and readable